Cute DragonLow-poly Dragon
Client was looking for a low-poly dragon for live web chat. He couldn't afford the whole treatment, but hopefully this will get him most of the way there.
Superman Spaceshipmovie space ship
Client wanted to fabricate the Superman Spaceship from some old movie, and needed a Pepakura-compatible model. Here's what I came up with! Yes, the pockets are missing from the bottom, that was by request.
Trunks SwordDBZ Trunks Sword
Client was looking for a 3d printed sword model, so all the fancy rendering was unnecessary.
EggmanRender03An egg man character model
An egg man character model
Rigged GuysRigged 3D body scans
Client commissioned a set of rigged 3d body scans for vr puppetry. Mission accomplished!
Not Sonic the HedgehogBlue Spike Man
He's so blue and spiky, and the most detailed part of him is the bottoms of his gigantic red sneakers.
Pokemon sculptureAsh and Dawn sculpture
Client approached me looking for a Christmas gift. They were lovely to work with, prompt with communication, really helpful with concept art, and really positive and constructive. The sculpture turned out pretty neat as a model, and the 3d print process worked perfectly!
Old style dooriron work door hardware
I was looking at various door vendors and I came across this page, which I thought was just too sad, so I made a better version and sent it them.
As of this writing, they haven't updated their website yet.
BNZO PendantA simple pendant logo
A simple pendant for a client who stopped responding after I quoted them $30 for modeling.
Cat RingCross between a leopard and a cheetah.
Jewelry modeling commission. The client first asked for a leopard, but then changed their mind and wanted a cheetah, so it ended up kind-of half-way between the two.
Neat design though!
Cartoon character 3d modelBlack Blossom 3d character model
The client wanted a 3d-printable model of their OC, "Black Blossom" so I made just that!
Red Hood Helmet3D print commission based on client's concept art
The client had some really solid concept art for this one. It makes a big difference!
Pirhana PigModel for 3D print
Client sent 2d reference and asked for a model for 3D print. Reference and resultant geometry are overlayed below.
Gamer BustCharacter low-poly head
Client sent me concept art of their character, and I started on a 3d model. Unfortunately, they stopped responding to e-mails, so the project stalled at this phase.
Panther HelmetPanther mask helmet
Client sent me a concept drawing (not shown) and a 3d scan of his head. This is the resulting 3d model of the helmet, designed for 3d printing.
SunshotGun from Destiny 2
I was commissioned to make a geometry-only 3D model of this gun from Destiny 2 so someone could 3D print it and make a prop reproduction. It was supposed to be as accurate as possible. The engraving took way too long.
You can watch a video of the working cylinder release mechanism through the link.
Cartoon HeadCartoon character head model
I was asked for geometry only of a cartoon character head, with the attached reference picture, and this is what I made.
Ellen Ripley WatchReplica Aliens watch
3d printed parts for the Ellen Ripley watch from the Aliens movie. Watch body designed after the Casio F-100 and watch surround are available for purchase through the links!
Broadsword ReferenceSword geometry for drawing reference
A returning client approached me with a drawing of this sword hilt, and some reference shots. They had been drawing it in their web comic, and wanted to improve the perspective rendering. The model is for geometry reference, but could also be used for 3D printing as well.
Anime Reference HeadsAnime style heads for animation reference.
A 2d animator wanted to step up his game, and had a set of 3d models made to use as reference to make sure unconventional angle shots were consistent.
RWBY, Qrow BranwenLow Poly Character Model
A low-poly charater model of Qrow Branwen, commissioned for a Garry's Mod avatar.
Justice Buster BatsuitBatman has a mech I guess?
Commission I completed for a client who wanted to make a Batsuit using Pepakura.
Lord Shaxx, DestinyVideo Game Character
It's Lord Shaxx! Fully textured and poly-count reduced. Much thanks to http://www.destinystlgenerator.com/ for the base geometry. Commission completed, but client failed to pay. If you want, you can Download the Shaxx model here.
Suggested donation is $85 USD
Adventurer Guild BadgeA custom badge, for 3D printing
Commission from a highly detailed sketch. Jason Crick had a great concept sketch, which made this job both easy and fun to work on. Hopefully I'll be able to upload a picture of the physical badge at some point.
Sayuri WakahisaAnime character 3D model
Client wanted this character modeled. http://madhatterkyoko.webs.com/apps/photos/album?albumid=7099089 for 3d printing, animation, etc. Project is stalled due to loss of funding, but the model is basically done.
SupermanKanji01BlackSuperman in Kanji
Superman in Kanji. My wife Anna came up with the design.
AscentPodV2_02Ascent Pod, a rough landing vessel.
Ascent Pod, a rough landing vessel. Ended up in a movie for a short rocket takeoff FX shot.
MinersCornerSiteOverview02Cover Image for Miner's Corner Art Proposal
Cover Image for Miner's Corner Art Proposal.
Read the proposal itself here:
http://www.peripheralarbor.com/MinersCornerArtProposal_Spooner_01.pdf Paul Spooner's Miners Corner Art Proposal
LumberGauntletConcept01Concept for a lumber grasping palm plate.
Concept for a lumber grasping palm plate.
Narratorway_avatar_3dAvatar from the 20 sided forums
Narratorway's avatar from the 20 sided forum, converted to 3d. Here's the Blender source file.
ygor_avatar_3dYgor's from the 20 sided forum.
Ygor's avatar from the 20 sided forum, converted to 3d. Here's the Blender source file.
Juggernaut Mask, Fit and FabJuggernaut mask tweaked for papercraft fab
A client approached me with a .obj model of a mask (Juggernaut from Dota2) that he was looking to turn into a costume. I was able to tweak the geometry to fit his head, as well as offset the surfaces to leave room to build it up to the correct size. Imported into Pepakura without a fuss.
Jungle SceneSome broadleaf tropical plants
Based on a picture by Craig Mullins. Amazing what a simple model and a good texture can do. Also, I love SSS, even though it isn't quite right in Blender yet. Original Concept
awesomechallengeEntry to the "Awesome Challenge"
Entry to the "Awesome Challenge", trying to replicate Tor Olav Kristensen's well known POV-Ray image in Blender.
Fusion_Core05Fusion Core, concept by Startitan
Based on this picture by Startitan. Quite fun to model, but I waited about a month and a half before texturing it, and I've pretty much lost interest in the project.
Fusion_Core06Fusion Core close, concept by Startitan
Fusion Core close, concept by Startitan
Gatt Gun GuyA man with a large machine gun
This guy comes directly from the gallery of Morriperkele at DeviantART. True, I made the 3d model, but it was his idea. Modeled and rendered in Blender, textures and some color re-balancing in the Gimp.
As you can see, this guy has a really big gatling (or "mini") gun. The helmet is the largest departure from the the original sketch, at the request of Morriperkele. This one might look rather dumb, but at least it's different. The model is available at this location.